Quick Answer: Who makes Oreilly transmission fluid?

Does Oreillys have Honda transmission fluid?

O’Reilly Conventional Transmission Fluid Dexron III/Mercon 1 Quart.

What is the difference between ATF and ATF 4?

ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.

Can you mix ATF 4 brands?

MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

Is Synthetic transmission fluid worth it?

Because of superior engineering, the synthetic fluid is better at lubricating your transmission and is able to sustain its viscosity in a broad temperature range. … You can be assured that in using these synthetic fluids your vehicle will perform better, even in extreme temperature conditions.

Are transmission additives any good?

Additives can harm your transmission

Aftermarket additives can disrupt the fluid’s finely tuned chemical balance and degrade performance. Plus, most vehicle and transmission manufacturers warn against using them. If you’re experiencing transmission problems, don’t waste your money on a “miracle” solution in a bottle.

IT IS INTERESTING:  Question: What causes loss of compression in an engine?

What is the best transmission additive on the market?

Our pick for the best transmission additive is the Prolong Super Lubricants PSL15000. It is one of the best transmission additives on the market. It reduces leaks, shudders, slippage, and sludge buildup. For a less pricey option, consider the Lucas LUC10009.

What transmission fluid is compatible with ATF 4?

It is fully compatible with all transmissions that require Mopar ATF +®, Mopar ATF+2™ and Mopar ATF+3™. Valvoline ATF + 4 is for use in all applications specifying Mopar ATF+4 or Type MS-9602 fluid.

What is the difference between ATF 3 and ATF 4?

Graphs in the paper show that the friction coefficient of fresh ATF+3 and ATF+4 is essentially identical, but as the fluid ages ATF+4 retains the “as new” coefficient while ATF+3 degrades.

Is dexron 3 the same as ATF 4?

Dexron IV was an upgraded version of Dexron III, which was used by GM only briefly. … GM considers Dexron VI to be “backward compatible,” meaning GM recommends it for use in any vehicle that originally used any earlier version of Dexron and that it can be mixed with them.

Help for your car